Sodium Hydroxide and Potassium Hydroxide Used ..

Potassium hydroxide can be found in pure form by reacting sodium hydroxide with impure potassium
Photo provided by Flickr

Potassium hydroxide - Brief Profile - ECHA

The facts of the reaction are exactly the same as with primary or tertiary halogenoalkanes. The halogenoalkane is heated under reflux with a solution of sodium or potassium hydroxide in a mixture of ethanol and water.

Sigma-Aldrich offers Sigma-Aldrich-417661, Potassium hydroxide solution for your research needs
Photo provided by Flickr

in the presence of potassium hydroxide: ..

But, usually, the culprit is the white, flaky powder that was used to make the soap was potassium hydroxide instead of sodium hydroxide. It is easy to mistake the two.

Shop online for a wide selection of Potassium hydroxide, ca. 85%, ACS reagent, ACROS Organics
Photo provided by Flickr

Sodium hydroxide results in a salt soap that crystallizes to become opaque. A soap made with potassium hydroxide does not crystallize in the same fashion, so it does not become solid or opaque. Although there are ingredients and recipes that can make liquid soap cloudy. No matter the salt compound used, both types of soaps lather, clean, and function like soaps.

Consider the addition of potassium hydroxide to ..
Photo provided by Flickr

Synthesis of SODIUM HYDROXIDE (NaOH) - …

If a halogenoalkane is heated under reflux with a solution of sodium or potassium hydroxide, the halogen is replaced by -OH and an alcohol is produced. Heating under reflux means heating with a condenser placed vertically in the flask to prevent loss of volatile substances from the mixture.

Synthesis description for preparation of SODIUM HYDROXIDE (NaOH)

Luckily, today you can get both sodium hydroxide and potassium hydroxide in pure versions with consistent strength from chemical vendors. Unlike your ancestors' unpredictable lye soap, you can predict that soaps made today, whether liquid or bar, made with sodium or potassium hydroxide, are designed to be gentle on your skin.​

53 g of anhydrous sodium carbonate are dissolved in 300 ml of water

Old fashioned or "pioneer" soaps were made from a lye that was . The result was primarily a soft, gooey soap. Wood ashes have a tendency to produce mostly potassium hydroxide. To compensate for the consistency issue, some old recipes say, "Add a handful of salt until the soap thickens." By adding some sodium to the mix, it firms up the texture.

Synthesis of Alum | Hydroxide | Aluminium - Scribd

To confuse matters somewhat, both sodium hydroxide and potassium hydroxide are colloquially called, "lye." Lye made with potassium hydroxide will be called out as potassium hydroxide lye.

25/02/2009 · The Synthesis of Alum ..

is not difficult once you get the compounds you need, which are relatively inexpensive, and carefully put them together in a controlled environment. The type of soap you make, bar versus liquid, is determined by the choice of compound you use for your salt, sodium hydroxide (NaOH), which is also known as lye, or potassium hydroxide (KOH), also known as potash.